Industrial 4G Router
Routing/Firewall/VPN
2.4GHz Wi-Fi
4 x Fast Ethernet
DIN-Rail
Dual SIM
2 Antennes
Ports: LTE (4G), 4x 10/100BaseTX, 1x RS232, 1x RS485, 2x DI/DO
Temperature: -40 to 75°C
| CELLULAR | |
| Frequency Bands | 4G(LTE) AU&NZ: B1/B2/B3/B4/B5/B7/B28 B40 EMEA: B1/B3/B5/B7/B8/B20 B38/B40/B41 America: B2/B4/B12/B13 Japan: B1/B3/B8/B18/B19/B26 B41 China: B1/B3/B8 B34/B38/B39/B40/B41 WCDMA: B1/B2/B4/B5/B8/B19 GSM/EDGE: B2/B3/B5/B8 |
| SIM | 2 x SIM slots 1.8V / 3V |
| SIM Failover | Auto-switch cases: weak signal data limited SMS limited no network network denied data connection fail |
| Auto APN List | Operator APN list |
| Mobile Quota Control | Set up customized data limits for both SIM cards |
| Number of Antennas | 2 (MAIN + AUX) |
| Connector | SMA female |
| ETHERNET | |
| Number of Ports | 1 x WAN + 3 x LAN or 4 x LAN |
| Port Type | Auto 10/100 Mbps auto MDI/MDIX |
| Magnet Isolation Protection | 1.5 KV |
| Wi-Fi (Optional) | |
| Wireless Mode | IEEE 802.11b/g/n Access Point (AP) Client |
| Wireless Speed | 2*2 MIMO 300 Mbps |
| Wireless Security | WPA WPA2 WEP 64/128 AES TKIP |
| Frequency Bands | 2.412 – 2.484 GHz (2.4 GHz ISM band) |
| Antennas | 2 x RP-SMA for Wi-Fi antenna connectors |
| SERIAL | |
| Number of Ports | 1 x RS-232 (3 PIN) + 1 x RS-485 |
| Connector | Terminal block |
| ESD Protection | ± 15 KV |
| Band Rate | 300bps to 115200bps |
| DIGITAL INPUT & OUTPUT | |
| Type | 2 x DI + 2 x DO |
| Connector | Terminal block |
| Isolation | 3KVDC or 2KVrms |
| Absolute maximum VDC | 36VDC |
| Absolute maximum ADC | 100 mA |
| NETWORK | ||||
| Routing | Static routing RIP OSPF BGP | |||
| Network Protocols | TCP UDP IPv4 ICMP NTP DNS HTTP HTTPS ARP VRRP PPP PPPoE DHCP | |||
| Connection Manager | Ping Detection Timer Reboot ICMP for link detection | |||
| DHCP | Static and dynamic IP allocation | |||
| DDNS | Supported some service providers others can be configured manually | |||
| Network Backup | Cellular Wired and Wi-Fi WAN options each of which can be used as backup | |||
| Firewall | Flexible access control of TCP UDP ICMP packets MAC address filter | |||
| MONITORING & MANAGEMENT | ||||
| Web GUI | HTTP/HTTPS firmware upgrade | |||
| Command Line Interface | SSHv2 and TELNET | |||
| 3rd party platform | Pending | |||
| POWER | ||||
| Connector | 3-pin 3.5 mm female socket with lock | |||
| Input Voltage Range | 9 to 48 VDC | |||
| Power Consumption | Idle: 100 mA@12 V Data link: 400 mA (peak) @12 V |
|||
| HARDWARE SPECIFICATION | ||||
| Watchdog | Built-in watchdog | |||
| LEDs | SYS NET USR RSSI x 3 | |||
| Reset Button | Reset/restore to factory default button | |||
| Ingress Protection | IP30 | |||
| Housing & Weight | metal 300 g | |||
| Dimensions | 106mm x 106mm x 40mm | |||
| Installations | DIN-rail mounting | |||
| Operating Temperature | -40 °C to 75 °C | |||
| Operating Humidity | 5% to 95% non-condensing | |||
| APPROVAL | ||||
| EMI | EN 55032:2012 Class B | |||
| EMS | IEC 61000-4-2 ESD: IEC 61000-4-3 RS: IEC 61000-4-4 EFT: IEC 61000-4-5 Surge: IEC 61000-4-6 CS: |
Level 4 Level 3 Level 3 Level 3 Level 3 |
||
| Vibration | EN50155 | |||
