INDUSTRIAL 4G ROUTER

Packaging box:

9W PSU

2x Mobile antennas (swivel, SMA male)

1x Wi-Fi antenna (swivel, RP-SMA male)

Ethernet cable (1.5 m)

SIM Adapter kit

QSG (Quick Start Guide)



CLASSIFICATION CODES

HS Code: 851762

HTS: 8517.62.00

contact

Industrial 4G Router

Mobile 

  • 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
  • 3GPP Release : Release 10/11 depending on the hardware version
  • StatuS: IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
  • SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
  • USSD : Supports sending and reading Unstructured Supplementary Service Data messages
  • Black/White list : Operator black/white list (by country or separate operators)
  • Multiple PDN : Possibility to use different PDNs for multiple network access and services
  • Band management : Band lock, Used band status displaY
  • Auto APN
  • Bridge : Direct connection (bridge) between mobile ISP and device on LAN
  • Passthrough :” Router assigns its mobile WAN IP address to another device on LAN

WIRELESS

  • Wireless mode : IEEE 802.11b/g/n, Access Point (AP), Station (STA)
  • Wi-Fi security ; WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
  • SSID/ESSID : SSID stealth mode and access control based on MAC address
  • Wi-Fi users : Up to 50 simultaneous connections
  • Wireless Connectivity Features : Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
  • Wireless MAC filter : Whitelist, blacklist
  • Wireless QR code generator ; Once scanned, a user will automatically enter your network without needing to input login information.

NETWORK

  • Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
  • Routing : Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
  • Network protocols : TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
  • VoIP passthrough support : H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring : Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall : Port forward, traffic rules, custom rules
  • Firewall status page : View all your Firewall statistics, rules, and rule counters
  • Ports management : View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
  • Network topology : Visual representation of your network, showing which devices are connected to which other devices
  • Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
  • DHCP : Static and dynamic IP allocation, DHCP Relay
  • QoS / Smart Queue Management (SQM)

Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

  • DDNS : Supported >25 service providers, others can be configured manually
  • Network backup : Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
  • Load balancing : Balance Internet traffic over multiple WAN connections
  • SSHFS : Possibility to mount remote file system via SSH protocol

ETHERNET

  • 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
  • 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

DLMS

  • DLMS – standard protocol for utility meter data exchange

SECURITY

  • Authentication : Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
  • Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  • DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN : Port and tag-based VLAN separation
  • Mobile quota control : Mobile data limit, customizable period, start time, warning limit, phone number
  • WEB filter : Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  • Access control : Flexible access control of SSH, Web interface, CLI and Telnet

VPN

  • OpenVPN : Multiple clients and a server can run simultaneously, 27 encryption methods
  • OpenVPN Encryption : DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
  • IPsec : IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
  • GRE tunnel over IPsec support
  • PPTP, L2TP : Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  • S-tunnel : Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN : Method of building scalable IPsec VPNs
  • SSTP client instance support
  • ZeroTier VPN client support
  • WireGuard VPN client and server support
  • Tinc offers encryption, authentication and compression in it’s tunnels. Client and server support.

OPC UA

  • Supported modes : Client, Server
  • Supported connection types : TCP

MODBUS

  • Supported modes : Server, Client
  • Supported connection types : TCP
  • MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
  • Supported data formats : 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

DATA TO SERVER

  • Protocol : HTTP(S), MQTT, Azure MQTT, Kinesis
  • Data to server : Extract parameters from multiple sources and different protocols, and send them all to a single server

MQTT GATEWAY

  • MQTT Gateway : Allows sending commands and receiving data from MODBUS Server through MQTT broker

DNP3

  • Supported modes : TCP Master, DNP3 Outstation

API

  • Teltonika Networks Web API (beta) support

MONITORING & MANAGEMENT

  • WEB UI : HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
  • FOTA : Firmware update from server, automatic notification
  • SSH (v1, v2)
  • SMS status, SMS configuration, send/read SMS via HTTP POST/GET
  • Call : Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
  • TR-069 : OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
  • MQTT : MQTT Broker, MQTT publisher
  • SNMP : SNMP (v1, v2, v3), SNMP Trap
  • JSON-RPC : Management API over HTTP/HTTPS
  • RMS : Teltonika Remote Management System (RMS)

IOT PLATFORMS

  • Cloud of Things : Allows monitoring of: Device data, Mobile data, Network info, Availability
  • ThingWorx : Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
  • Cumulocity

Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

  • Azure IoT Hub

Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

SYSTEM CHARACTERISTICS

  • CPU : Mediatek, 580 MHz, MIPS 24KEc
  • RAM : 128 MB, DDR2
  • FLASH storage : 16 MB, SPI Flash

FIRMWARE / CONFIGURATION

  • WEB UI : Update FW from file, check FW on server, configuration profiles, configuration backup
  • FOTA : Update FW
  • RMS : Update FW/configuration for multiple devices at once
  • Keep settings : Update FW without losing current configuration

FIRMWARE CUSTOMISATION

  • Operating system : RutOS (OpenWrt based Linux OS)
  • Supported languages : Busybox shell, Lua, C, C++
  • Development tools : SDK package with build environment provided
  • GPL customization ; You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs.

INPUT / OUTPUT

  • Input : 1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high
  • Output : 1 x Digital Output, Open collector output, max output 30 V, 300 mA
  • Events : Email, RMS, SMS
  • I/O juggler : Allows to set certain I/O conditions to initiate event

POWER

  • Connector : 4-pin industrial DC power socket
  • Input voltage range : 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
  • PoE (passive)

Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 – 30 VDC

  • Power consumption : < 6.5 W Max

PHYSICAL INTERFACES

  • Ethernet : 2 x RJ45 ports, 10/100 Mbps
  • I/O’s : 1 x Digital Input, 1 x Digital Output on 4-pin power connector
  • Status LEDs : 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
  • SIM : 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
  • Power : 1 x 4-pin power connector
  • Antennas : 2 x SMA for LTE, 1 x RP-SMA for Wi-Fi antenna connectors
  • Reset : Reboot/User default reset/Factory reset button

PHYSICAL SPECIFICATION

  • Casing material : Aluminium housing, plastic panels
  • Dimensions (W x H x D): 83 x 25 x 74 mm
  • Weight : 125 g
  • Mounting options : Bottom and sideways DIN rail mounting slots

OPERATING ENVIRONMENT

  • Operating temperature : -40 °C to 75 °C
  • Operating humidity : 10% to 90% non-condensing
  • Ingress Protection Rating : IP30

REGULATORY & TYPE APPROVALS

  • CE, UKCA, ANRT, Kenya, ICASA, FCC, IC, PTCRB, NOM, RCM, KC, Giteki, IMDA, E-mark, CB, UL/CSA Safety, RoHS, REACH, R118