4G LTE WiFi Industrial Router
Five Ethernet Ports, WiFi, RS-232, RS-485, I/O and 4G LTE
DIN-Rail mounting and 12 to 48 V DC power supply
Integrated Firewall, Next-Generation Encryption, OpenVPN and IPsec
Integrated Watchdog, Dual-SIM and MIMO for uninterrupted operation
Fully integrated with Smart EMS and VPN Security Suite
Cellular characteristics
Chipset : Cinterion PLS8-E
2G standard : GSM, GPRS
3G standard : UMTS, HSDPA, HSUPA, HSPA+
4G standard : LTE
Frequency GSM/GPRS : 900/1800 MHz
Frequency UMTS : 900/1800/2100 MHz
Frequency LTE : 800/900/1800/2100/2600 MHz
Download (max) : 100 Mbps
Upload (max) : 50 Mbps
Authentication : CHAP/PAP/MS-CHAP/MS-CHAP2
Cellular antenna connector : 2x SMA (f)
APN functions : APN (Access Point Name), VPDN (Virtual Private Dialup Network, IP VPN of the network operator)
Dial On Demand : Always online or dial, SMS or local data transfer
SMS functions : Reboot and status SMS
Wi-Fi characteristics
IEEE 80211b : 11 Mbps
IEEE 802 11g : 54 Mbps
IEEE 80211n : 150 Mbps
IEEE 80211i : WPA / WPA2 / TKIP / PSK / AES / CCMP
WEP : 64-bit / 128-bit encryption
Access point mode
Client mode
Wi-Fi antenna connector : 2x Reverse Polarity SMA (f)
Ethernet
Connector TX : RJ45
10/100BaseTX : 5 Ports (1 of them WAN)
IEEE 8023 : 10BaseT / CSMA/CD (Ethernet)
IEEE 8023a : 10Base2
IEEE 8023i : 10BaseT
IEEE 8023u : 100BaseT(X) / Fast Ethernet
Serial interfaces
Serial interfaces amount : 2
Serial interfaces type : RS-232, RS-485
Serial interface : TXD, RXD, GND, A(RS-485+), B(RS-485-)
Serial interface connector : Terminal blocks 5-pin (m)
Serial interface baud rate : 1200 – 115200 bps
Serial interface additional protocols : Transparent TCP, Virtual COM, Modbus TCP / RTU
Additional interfaces
WAN port : 1 Port
IEEE 8021q : VLAN (dot1q)
Console port : 1 RJ45 console port (RS-232)
I/Os : 1x Digital Input (galvanic isolation, Status “1”: +10-+30 V, Status “0”: -30-+3 V), 1x Relay Output (2 A @ 30 V DC)
SIM card slot : 2
Network characteristics
Routing : Static routes and dynamic routes with RIP or OSPF
Network protocols : ICMP, TCP, IP, UDP, DHCP, NTP, DNS, HTTP, HTTPS, Telnet, ARP, VRRP, PPP, SSH
Connection inspection : PPP LCP echo and ICMP keep alive and IP SLA / tracking for checking connections
NAT and PAT : Network Address Translation (NAT) and Port Address Translation (PAT)
DDNS (DynDNS) : Supports Dynamic DNS
VRRP : Automatically switch to slave router if the master router fails
IPsec : IKEv1, IKEv2, Pre Shared Keys, Certificates, Tunnel mode, Transport mode, DMVPN
L2TP : Client, Server, L2TP over IPSec
OpenVPN : Client, Server
GRE : Point-to-Point, Subnet, GRE over IPSec
VPN authentication : Preshared key, digital certificates
Firewall : Stateful Packet Inspection (SPI), ACLs
Access control : ACLs, RADIUS, TACACS+, LDAP
Realtime clock : Provides the system with the current time (NTP)
Power supply
Power supply V DC : 12 – 48 V DC
Power supply connector : Terminal blocks 2-pin (m)
Power consumption standby : 3,8 W
Power consumption aktiv : 5,3 W
Software characteristics
Configuration : Webbrowser, Telnet, SSH and Serial port
Updates : Webbrowser, Serial port, TFTP, FTP
Physical characteristics
Housing material : Metal
Ingress protection : IP30
Dimensions (W x H x D) : 45 x 132,6 x 112,8 mm
Weight : 606 g
Mounting : DIN rail
Environmental
Operating temperature range : -25 – +70 °C
Storage temperature range : -40 – +85 °C
Humidity : 5 – 95 %, non condensing
Shock : IEC 60068-2-27
Free fall : IEC 60068-2-32
Vibration : IEC 60068-2-6
Approvals
Vehicles : ECE test mark
EMC, EMI characteristics
EDS : EN 61000-4-2, level 4
Surge protection : EN 61000-4-5, level 3
EFT : EN 61000-4-4, level 4
RF : EN 61000-4-3, level 3
RC : EN 61000-4-6, level 3
Oscillatory wave immunity : EN 61000-4-11, Level 3
Variation magnetic field immunity : EN 61000-4-8, level 5
Advanced functions
Watchdog : Software and hardware watchdog
LED : LED indicators for the signal strength, 8 status LEDs: POWER, STATUS, WARN, ERROR, Modem, 2x SIM, VPN
